Hi Any /- everybody,
Im rebuilding an old stuart swan and I need some nuts to finish the job. Stuart cannot supply this and anywhere I turn to I must buy in bulk (megabulk...). If anybody can supply me with about 50 of them (my address in Holland [Here we use metric hey..]), you can contact me via email.
Im talking about stainless steel nuts quite small 5/32" inch with a 32 guage thread.
mr.black@mail.com,
Thanks in advance.
In need of A2 5/32 - 32G nuts (stainless steel 32 gauge)
Re: In need of A2 5/32 - 32G nuts (stainless steel 32 gauge)
Have you tried McMaster Carr? Here's a link:
http://www.mcmaster.com/#hex-nuts/=bf4980
Click on hex nuts then scroll down to Machine Screw Hex Nuts
http://www.mcmaster.com/#hex-nuts/=bf4980
Click on hex nuts then scroll down to Machine Screw Hex Nuts
- gondolier88
- Full Steam Ahead
- Posts: 290
- Joined: Fri Jun 18, 2010 8:54 pm
- Boat Name: No Boat Yet
Re: In need of A2 5/32 - 32G nuts (stainless steel 32 gauge)
Hi Mr Black,
5/32" x 32 is a model engineering thread, usually used on brass.
Try here- if they don't stock them online they will definitely make them for a fair price; http://www.ekpsupplies.co.uk/
Good luck!
Greg
5/32" x 32 is a model engineering thread, usually used on brass.
Try here- if they don't stock them online they will definitely make them for a fair price; http://www.ekpsupplies.co.uk/
Good luck!
Greg