Hello from Minnesota
-
- Full Steam Ahead
- Posts: 246
- Joined: Mon Dec 14, 2015 2:12 pm
- Boat Name: Platypus, Shelduck
- Location: Very eastern England
Re: Hello from Minnesota
Welcome to the forum Will. Remember that none of us has all the definitive answers on how to make steamboats or their models, and lots of different ways will be perfectly satisfactory, particularly at model scale.
This web site might give you some ideas, and maybe your local library could get Paul Fisher's manual on model boat building.
http://www.makeamodelboat.com
This web site might give you some ideas, and maybe your local library could get Paul Fisher's manual on model boat building.
http://www.makeamodelboat.com
-
- Full Steam Ahead
- Posts: 936
- Joined: Sat Aug 13, 2011 6:41 pm
- Boat Name: B.N.Y.S.
- Location: Middle Earth
Re: Hello from Minnesota
Just like big boats, marine ply! Most modelling shop carry the thinner sections.
Retirement is about doing what floats your boat!
A BODGE : - A Bit Of Damn Good Engineering.
A BODGE : - A Bit Of Damn Good Engineering.
-
- Just Starting Out
- Posts: 15
- Joined: Thu May 25, 2017 3:24 am
- Boat Name: No Boat Yet
Re: Hello from Minnesota
Thanks everyone,
I guess I will just start messing around with different things to get the feel of it. I think the wood route will be better for me than fiberglass.
Will
I guess I will just start messing around with different things to get the feel of it. I think the wood route will be better for me than fiberglass.
Will
- DetroiTug
- Full Steam Ahead
- Posts: 1863
- Joined: Fri Nov 27, 2009 5:56 pm
- Boat Name: Iron Chief
- Location: Northwest Detroit
Re: Hello from Minnesota
Get a sheet of "doorskin" from the lumberyard. Strong, cheap and plenty to work with.
- cyberbadger
- Full Steam Ahead
- Posts: 1123
- Joined: Thu Nov 07, 2013 9:16 pm
- Boat Name: SL Nyitra
- Location: Northeast Ohio, USA
Re: Hello from Minnesota
Welcome Will!
I like Minnesota because my boiler was made there. Jeff Lund, LundMachineWorks in New Ulm.
-CB
I like Minnesota because my boiler was made there. Jeff Lund, LundMachineWorks in New Ulm.
-CB
-
- Just Starting Out
- Posts: 15
- Joined: Thu May 25, 2017 3:24 am
- Boat Name: No Boat Yet
Re: Hello from Minnesota
Thanks CB,
Yes, Jeff does great work! Have you ever heard of Lawrence Swanz? He's a boiler maker in MN and does great work also.
Will
Yes, Jeff does great work! Have you ever heard of Lawrence Swanz? He's a boiler maker in MN and does great work also.
Will
- fredrosse
- Full Steam Ahead
- Posts: 1906
- Joined: Fri Nov 20, 2009 5:34 am
- Boat Name: Margaret S.
- Location: Phila PA USA
- Contact:
Re: Hello from Minnesota
Another modeling option, strip planking. This method is used often to make light weight canoes and kayaks, thin wood strips, fiberglass cloth covering, makes for an excellent steamboat model. The pictures below show a 6 foot long steamboat model I made with these materials for the John Fitch Museum. John Fitch built the first steamboat in regular commercial service, Philadelphia PA, 1790, 17 years before Fulton.
- Attachments
-
- Interior of Fitch Hull
- FitchHullInterior.jpg (20.8 KiB) Viewed 7607 times
-
- Hull covered with fiberglass cloth & resin
- Fitch-FiberglassCloth.jpg (18.8 KiB) Viewed 7607 times
-
- Thin strips nailed to wood frames, 1/4 inch thick soft wood
- StripPlankHull.jpg (35.77 KiB) Viewed 7607 times
-
- Just Starting Out
- Posts: 15
- Joined: Thu May 25, 2017 3:24 am
- Boat Name: No Boat Yet
Re: Hello from Minnesota
Thanks for that info!
I have started building a little hull built from a balsa wood frame and sheet wood planking. It's small, but I thought it would be good to start with. After I complete this hull I will hopefully go on to build a bigger one for my actual steamboat, one that's big enough to hold my steam plant.
Will
I have started building a little hull built from a balsa wood frame and sheet wood planking. It's small, but I thought it would be good to start with. After I complete this hull I will hopefully go on to build a bigger one for my actual steamboat, one that's big enough to hold my steam plant.
Will