Penberthy tailpieces?

Moderator: csonics

Post Reply
User avatar
csonics
Anne from Little Britan
Anne from Little Britan
Posts: 232
Joined: Tue Nov 17, 2009 11:17 pm
Boat Name: No Boat Yet
Location: Roseville, MN
Contact:

Penberthy tailpieces?

Post by csonics » Wed Nov 18, 2009 4:19 pm

Posted on behalf of DetroiTug:

DetroiTug
Warming the Engine


Joined: 19 Jul 2009
Posts: 73
Location: Outside Detroit
Posted: Tue Aug 04, 2009 8:13 am Post subject: Penberthy tailpieces?
Just acquired a 1/2" Penberthy AA 528 injector. It is in really good shape, but of course the tailpieces are missing. Does anyone have a source for these? Or Does anyone have a drawing of these? I should be able to make them, If I knew the dims, it would make it much easier. The ID's may be critical for proper operation. One (steam inlet) looks to be flat-faced, and the other two look to be spherical faced, anyone know what this radius might be?

Any help is appreciated,

Ron
Back to top


artemis
Just Starting Out


Joined: 24 Sep 2007
Posts: 19
Location: Portland, OR, USA
Posted: Mon Oct 12, 2009 2:16 pm Post subject:
Penberthy - although now part of Tyco Valves and Controls - still exists: http://www.penberthy-online.com and probably has the replacement tailpieces. You could also try Lloyd at Beckmann Boatshop: http://www.steamboating.net

And yes, the dimensions and cone shapes/faces are CRITICAL!
Back to top


DetroiTug
Warming the Engine


Joined: 19 Jul 2009
Posts: 73
Location: Outside Detroit
Posted: Mon Oct 12, 2009 11:45 pm Post subject:
Thanks Ron, I'll check them out.

Dims are critical, good to get that confirmed.
Post Reply