Posted on behalf of steamboatjack:
steamboatjack
Urchin
Joined: 01 Oct 2007
Posts: 39
Posted: Wed Jan 16, 2008 3:58 pm Post subject: new engine design
Pictured here (hopefully) is my new prototype engine about 50% completed, this is a twin HP design with Joy's valve gear. There are no castings involved the iron parts being machined from cast bar. The bedplate is made up from three laser cut plates.
I have not done much on this lately as I am concentrating on finishing the first Elliott bay triple expansion engine.
Alphawolf45
Just Starting Out
Joined: 10 Jan 2008
Posts: 18
Posted: Thu Jan 17, 2008 10:53 am Post subject:
Wow thats a very, very purty motor.. I figure to build my first steam launch engine real soon..Will be tough to do nicer than that one right there
.
More pictures please?
Back to top
Bill57
Just Starting Out
Joined: 11 Feb 2008
Posts: 1
Posted: Mon Feb 11, 2008 1:58 pm Post subject:
The Joy valve gear is an interesting choice. What is the bore x stroke?
Bill57
Back to top
steamboatjack
Urchin
Joined: 01 Oct 2007
Posts: 39
Posted: Wed Feb 20, 2008 4:01 am Post subject: bore & stroke
the prototype is 58 x 64mm but I have drawings for 64 x 72
and 75 x 82mm (both with three bearing crankshafts)
jack
new engine design
Moderator: csonics