Hello everyone,
Glad to be a member. Not new at boating however new at steam boating. I have been a Marine Surveyor for the past 31 years and had the pleasure of surveying the Steamer Mascot and the Admiral's launch New Jersey from WWI. The photos are of my new project, 1974 "homemade" with an 1885? single cylinder mounted up front. Yes, upfront. This boat 'Dauntless' came from California and I bought it from the second owner. If anyone has information on it, Please let me know.
Sincerely,
Perry
New Member
-
- Just Starting Out
- Posts: 7
- Joined: Mon Dec 05, 2022 3:16 pm
- Boat Name: Herman ex. Dauntless
- Location: Madisonville, Louisiana
- Contact:
New Member
- Attachments
-
- IMG_4294.jpg (65.05 KiB) Viewed 3491 times
- fredrosse
- Full Steam Ahead
- Posts: 1906
- Joined: Fri Nov 20, 2009 5:34 am
- Boat Name: Margaret S.
- Location: Phila PA USA
- Contact:
Re: New Member
Nice boat, should make a good steamer. Where are you?
- PeteThePen1
- Full Steam Ahead
- Posts: 553
- Joined: Thu Nov 19, 2009 11:53 pm
- Location: Aberystwyth, Wales, Europe
- Contact:
Re: New Member
Welcome Perry!
You have a nice looking boat there which, after a little TLC, will turn heads wherever you go. Having the engine up front is not that daft/unusual. My former boat Frances Ann had the engine in front of the boiler so as to allow a reasonable amount of room for the skipper and crew.
Hope you will keep us posted as you make progress.
Regards
Pete
You have a nice looking boat there which, after a little TLC, will turn heads wherever you go. Having the engine up front is not that daft/unusual. My former boat Frances Ann had the engine in front of the boiler so as to allow a reasonable amount of room for the skipper and crew.
Hope you will keep us posted as you make progress.
Regards
Pete
- PeteThePen1
- Full Steam Ahead
- Posts: 553
- Joined: Thu Nov 19, 2009 11:53 pm
- Location: Aberystwyth, Wales, Europe
- Contact:
Re: New Member
Hi Perry
As a postscript I will update the Steam Boat Association of GB's website as I picked up Dauntless as being for sale and had posted the ad in our Worldwide sales and wants section. The SBA is a worldwide group and has many members in the USA not to mention having a quarterly magazine. The latter is always keen to have build stories, re-build stories, etc. if you are the sort of person who is happy to write about what you have done. We have an excellent editor so text can be pretty rough.
We are currently running the story of my late engineer friend who used to keep a small notebook. He passed it to me and I typed it up, and then we discussed whether I had got stuff right. Our editor then checks the English, grammar, etc. and as an ex-marine engineer will point out where one might be on dodgy ground. Sadly the story will not finish as Chris passed away before finishing, but I think it still makes a good read.
Best wishes
Pete
As a postscript I will update the Steam Boat Association of GB's website as I picked up Dauntless as being for sale and had posted the ad in our Worldwide sales and wants section. The SBA is a worldwide group and has many members in the USA not to mention having a quarterly magazine. The latter is always keen to have build stories, re-build stories, etc. if you are the sort of person who is happy to write about what you have done. We have an excellent editor so text can be pretty rough.
We are currently running the story of my late engineer friend who used to keep a small notebook. He passed it to me and I typed it up, and then we discussed whether I had got stuff right. Our editor then checks the English, grammar, etc. and as an ex-marine engineer will point out where one might be on dodgy ground. Sadly the story will not finish as Chris passed away before finishing, but I think it still makes a good read.
Best wishes
Pete