Hi,
the speed range of my device goes from 10 to 9999 rpm.
---
Dietrich
Steam Thistle Cluaran
-
dampfspieler
- Full Steam Ahead
- Posts: 232
- Joined: Wed Nov 18, 2009 6:59 am
- Boat Name: No Boat Yet
- Location: Neubrandenburg, Germany
- Contact:
-
RNoe
- Full Steam Ahead
- Posts: 212
- Joined: Sun May 26, 2019 5:29 pm
- Boat Name: Cluaran
- Location: Northern Oregon, USA
Re: Steam Thistle Cluaran
Thanks for verifying that.
Mine is probably the same.
Good products, lousy documentation...
RussN
Mine is probably the same.
Good products, lousy documentation...
RussN
-
Lopez Mike
- Full Steam Ahead
- Posts: 1880
- Joined: Wed Dec 07, 2011 6:41 am
- Boat Name: S.L. Spiffy
- Location: Lopez Island, Washington State, USA
Re: Steam Thistle Cluaran
My one cylinder engine can tick over fairly slowly but not, I suspect, below perhaps 20 r.p.m. Without a MUCH larger flywheel, that is!
Mike
Mike
If you think you are too small to make a difference, try sleeping with a mosquito.
Dalai Lama
Dalai Lama
-
dampfspieler
- Full Steam Ahead
- Posts: 232
- Joined: Wed Nov 18, 2009 6:59 am
- Boat Name: No Boat Yet
- Location: Neubrandenburg, Germany
- Contact:
Re: Steam Thistle Cluaran
Hi,
i received all the parts and checked their function using a breadboard.
I swung the magnet past the sensor by hand to check the display. That worked.
Tomorrow I will mount the setup on the lathe to check the accuracy of the gauge.
The 9V battery will be installed in the case. Then there is the switch for the supply voltage of the tachometer.
---
Dietrich
i received all the parts and checked their function using a breadboard.
- RPM_M_001kl.JPG (104.37 KiB) Viewed 154 times
I swung the magnet past the sensor by hand to check the display. That worked.
- RPM_M_002kl.JPG (102.52 KiB) Viewed 154 times
Tomorrow I will mount the setup on the lathe to check the accuracy of the gauge.
The 9V battery will be installed in the case. Then there is the switch for the supply voltage of the tachometer.
---
Dietrich
-
RNoe
- Full Steam Ahead
- Posts: 212
- Joined: Sun May 26, 2019 5:29 pm
- Boat Name: Cluaran
- Location: Northern Oregon, USA
Re: Steam Thistle Cluaran
Excellent.
¥ou obviously read the instructions and found the correct magnet pole for triggering the display.
It is interesting to me to read the 1 and 2 star reviews on Amazon, and see that the users did not read the instructions!
Always entertaining to me to see those mistakes being made. Unnecessarily.
Glad you are making yours work.
And I look forward to seeing your final product.
RussN
¥ou obviously read the instructions and found the correct magnet pole for triggering the display.
It is interesting to me to read the 1 and 2 star reviews on Amazon, and see that the users did not read the instructions!
Always entertaining to me to see those mistakes being made. Unnecessarily.
Glad you are making yours work.
And I look forward to seeing your final product.
RussN