How are you fairing?

For the non-technical side of living with Steamboats, videos and general pictures.
User avatar
DetroiTug
Full Steam Ahead
Full Steam Ahead
Posts: 1701
Joined: Fri Nov 27, 2009 5:56 pm
Boat Name: Iron Chief
Location: Northwest Detroit

Re: How are you fairing?

Post by DetroiTug » Mon Apr 20, 2020 12:15 am

Wes, thanks for asking. I'm hoping everyone and theirs are getting through this unbothered.

I moved out of Detroit last year and so thankful I did, that is one of the nation's hotspots for outbreak, and I would've been right in the middle of it. Where I live now is like another world, largely unaffected, I think we have 2 possible cases in the whole county. All the stores are staying pretty well stocked, there isn't a concentration of cases within a 200 mile radius. Most people here are still practicing safe guidelines though, distancing and wearing masks etc. I'm just staying put in the house or shop until this thing blows over. I haven't put gas in my truck for about four weeks. Gas is $1.25 per gallon here. In Michigan its under one dollar per gallon, but it comes with covid19. Its always something🤨 Ron
User avatar
TahoeSteam
Full Steam Ahead
Full Steam Ahead
Posts: 622
Joined: Fri Mar 07, 2014 5:38 am
Boat Name: Wayward Belle
Location: South Lake Tahoe, CA, USA
Contact:

Re: How are you fairing?

Post by TahoeSteam » Thu Apr 23, 2020 8:44 pm

Dietrich,
thank you for sharing that video. Is that for a Climax Class A locomotive, or something else?

Steve,
Do you have any photos of your launch? I'm sure we'd all love to see some steam photos right now.

Ron,
I'm happy to hear you out got out of there and things are a lot safer down south. Incredible fuel prices are so low out there. Gas is still $2.40/gal for regular, and $3.25/gal for diesel out here. The state attorney general should open an investigation.

I'm glad you all are staying safe and healthy. I hope the more silent others are doing the same. We don't need to no lose any more steamboaters than the normal attrition... Wish we didn't have the normal attrition either.

Trying my hand at raising a few meadow maggots (sheep) and cluckers. Help mow the grass, and suppelment my protein consumption.

Hope to build the shop this summer and get some projects indoors... We'll see how this plays out.
~Wesley Harcourt~
Check out the steamboat and steamSHIP videos on my YouTube page: https://www.youtube.com/c/wesleyharcourtsteamandmore
User avatar
DetroiTug
Full Steam Ahead
Full Steam Ahead
Posts: 1701
Joined: Fri Nov 27, 2009 5:56 pm
Boat Name: Iron Chief
Location: Northwest Detroit

Re: How are you fairing?

Post by DetroiTug » Thu Apr 23, 2020 11:31 pm

Wes,

Michigan is really bad about price gouging on everything, I'm shocked the gas price is that low there, looks like the greedy dropped the ball on that one. The wonderful governor already tried to invoke a 45 cent per gallon tax on it, and the people went berserk. They have a massive recall effort going to get her out.

Just a comparison list to show pricing difference.

Car insurance MI 2200 per year, KY 680 Same vehicle, same company same coverage. Progressive. Detroit area has the highest rates in the USA 80% of the drivers are uninsured. Nearly every accident is a hit and run

License plates, MI 125, KY 20, well 25 because I sprung for the vanity plate. :roll:

Helium argon mix for my TIG. MI 120, KY 55

No tax on groceries.

Property taxes are about 1/4th as much.

People are friendly, and its been high in near 60s, practically all winter, and sunny most days. It will get very hot in July and august, but thats ok, crank up the air conditioner.

Home prices are about half.

You can legally pack a loaded pistol in your car or on your person, no permit, no CCW required. They do background checks at purchase, but thats it. Oddly though, I haven't seen one person carrying. Detroit has open carry, and lots of people do, crime has dropped as a result.

Don't have to register or plate utility trailers

Can ride a four Wheeler anywhere you want except an expressway or interstate, helmet optional., police don't care. If you want it legal put an orange triangle on the back.

They are very tough on crime and hand down harsh penalties for drugs, etc, not a good place to break the law. It's quiet and safe and the state intends to keep it that way.

Oh, and the women are very attractive too, which never hurts. ;)

Ron
User avatar
Lopez Mike
Full Steam Ahead
Full Steam Ahead
Posts: 1803
Joined: Wed Dec 07, 2011 6:41 am
Boat Name: S.L. Folly
Location: Lopez Island, Washington State, USA

Re: How are you fairing?

Post by Lopez Mike » Fri Apr 24, 2020 1:04 am

Doing fine here in Washington State as far as my physical health is concerned. NOT doing well emotionally as I seem to be surrounded by idiots and dolts. None of the people working in the stores seem to be wearing masks. I saw a woman two days ago with a hole cut in her mask for insertion of her cigarette.

And now the idiot county government has closed my nearest launching ramp. This a a major irritant as I was just getting ready to test launch my new hull with the boiler and engine strapped in place to check on my guesses about fore and aft C.G.

As you may know, I'm building a duplicate design to that of Steve Weaver's but using stitch and glue methods. I now have a watertight hull ad the next move is boiler and engine stringers. Not having a large tank in my yard, I'm dependent on a short float to check things out.

So the whole project is on hold and I'm not a happy camper.
If you think you are too small to make a difference, try sleeping with a mosquito.
Dalai Lama
User avatar
dampfspieler
Full Steam Ahead
Full Steam Ahead
Posts: 151
Joined: Wed Nov 18, 2009 6:59 am
Boat Name: No Boat Yet
Location: Neubrandenburg, Germany
Contact:

Re: How are you fairing?

Post by dampfspieler » Fri Apr 24, 2020 8:01 am

Hi Wesley,
... Is that for a Climax Class A locomotive, or something else?
no, for a SENTINEL Shunter from Model Engineer published mid of the 60tees. The originals had a high pressure crosstube boiler and the engine had popped valves. For further information this WIKIPEDIA-Article is helpful.

The model
MESirena01.png
MESirena01.png (186.11 KiB) Viewed 1735 times

The original
SENTINEL_Seitenansicht.jpg
SENTINEL_Seitenansicht.jpg (53.26 KiB) Viewed 1735 times

Best
Dietrich
User avatar
RNoe
Full Steam Ahead
Full Steam Ahead
Posts: 117
Joined: Sun May 26, 2019 5:29 pm
Boat Name: Cluaran
Location: Northern Oregon

Re: How are you fairing?

Post by RNoe » Fri Apr 24, 2020 4:30 pm

We're doing fine here in northern Oregon. Only 4 diagnosed cases of Covid-19 in Hood River County...so far. More on the way I'm sure.
We are being careful. I just turned 70 y.o. last week and figure I need to be extra careful to stay healthy. At least until a vaccination is available.

Since I cannot put my Steam Thistle into the water (nearest boat launch ramps are closed) I've been working on finishing my 7.5" gauge steam locomotive.
Some pics are attached for your entertainment. It is a model of Rayonier (former Polson Logging) 90-ton 2-8-2. Lots of fun building this.

Other than that, steamboat improvements continue:
I'm installing a new 4-chime whistle (received it yesterday),
and a different more sensitive steam atomizer control system:
I rebuilt it from the original Blackstaffe-powered steamer Maggie, 1964 vintage.
We'll see how those work out.
Cheerio all.
RussN
Completed 3 sml.JPG
Completed 2 sml.JPG
Completed 1 sml.JPG
Post Reply