Well done Dietrich
As the others have said the engine parts looks wonderful. The more you show us of the build the more convinced I become that I just don't have the skills to build your design, which is a pity. However, I can continue to enjoy what you are doing.
Regards
Pete
TWIN 32 x 38 mm - steam engine for small boats or canoes
-
PeteThePen1
- Full Steam Ahead
- Posts: 499
- Joined: Thu Nov 19, 2009 11:53 pm
- Boat Name: Frances Ann
- Location: Cheshire, UK
- Contact:
-
slow_steamer
- Just Starting Out
- Posts: 1
- Joined: Mon Jul 29, 2013 8:15 pm
- Boat Name: Waiting for Steam
Re: TWIN 32 x 38 mm - steam engine for small boats or canoes
Hello Dietrich,
Might you share your drawings?
I'm mostly interested in the valve box and the linkage.
MArk B.
Might you share your drawings?
I'm mostly interested in the valve box and the linkage.
MArk B.
-
dampfspieler
- Full Steam Ahead
- Posts: 217
- Joined: Wed Nov 18, 2009 6:59 am
- Boat Name: No Boat Yet
- Location: Neubrandenburg, Germany
- Contact:
Re: TWIN 32 x 38 mm - steam engine for small boats or canoes
Hello Mark,
i'm very sorry, but the engine is designed in 3D, so there are currently no classic 2D drawings.
When the engine is finished and successfully tested, I may create a set of drawings, but that is uncertain.
Dietrich
i'm very sorry, but the engine is designed in 3D, so there are currently no classic 2D drawings.
When the engine is finished and successfully tested, I may create a set of drawings, but that is uncertain.
Dietrich