Page 2 of 2
Re: Knocking ??
Posted: Fri Sep 28, 2018 6:37 am
by Albert R
Do not forget to check the stern tube bearing (especially if you have a rubber one). If too loose, resonance causes strange knocking at certain revolution ranges.
Albert
Re: Knocking ??
Posted: Tue Dec 04, 2018 5:18 pm
by hedleypiper
irregular Knocking solved I think! It seemed to come from the condenser.
Discharge pipe straight from the L.P. to condenser ( the preheater was collapsed inside so cut it off which might have started the problem) . Added a 'dibber' pipe to suck from the lowest part of the condenser and serviced the vacuum pump, to great good effect ! about -18psi shows on gauge.
Re: Knocking ??
Posted: Mon Dec 10, 2018 1:16 am
by TahoeSteam
Nicely done!
Re: Knocking ??
Posted: Mon Feb 11, 2019 10:12 pm
by wsmcycle
I'm not too up on this sort of esoterica.
This is the best reply ever!!!!! Oh that I could mingle with that!!!
Re: Knocking ??
Posted: Mon Feb 11, 2019 11:56 pm
by Lopez Mike
Had a friend who was in Greece a couple of years ago and found out that these greek words mean something.
Esoterica meant a bus line that stayed within the city. "Something held within."
Also Metaphor was the name of the airport carts to haul your luggage. "To carry."
Who knew?