Start of VFT build
-
- Just Starting Out
- Posts: 16
- Joined: Fri Sep 14, 2012 4:03 pm
- Boat Name: ST Mariana
Start of VFT build
Yay. Tomorrow I pick up steel for tube sheets and take to machine shop for tube holes.
VFT. 24 inch dia; 48 inch tall.
VFT. 24 inch dia; 48 inch tall.
- RNoe
- Full Steam Ahead
- Posts: 250
- Joined: Sun May 26, 2019 5:29 pm
- Boat Name: Cluaran
- Location: Northern Oregon, USA
Re: Start of VFT build
For a 5 to 8 horse power boiler?
RussN
RussN
-
- Just Starting Out
- Posts: 16
- Joined: Fri Sep 14, 2012 4:03 pm
- Boat Name: ST Mariana
Re: Start of VFT build
yes, hopefully six hp when assembled.
- TahoeSteam
- Full Steam Ahead
- Posts: 813
- Joined: Fri Mar 07, 2014 5:38 am
- Boat Name: Wayward Belle
- Location: South Lake Tahoe, CA, USA
- Contact:
Re: Start of VFT build
Wet leg firebox?
~Wesley Harcourt~
https://www.youtube.com/c/wesleyharcourtsteamandmore
https://www.youtube.com/c/wesleyharcourtsteamandmore
-
- Just Starting Out
- Posts: 16
- Joined: Fri Sep 14, 2012 4:03 pm
- Boat Name: ST Mariana
Re: Start of VFT build
yes wet leg Wes. standard VFT 'donkey' boiler. Plate now at machine shop getting tube holes put in. Go pick up 24" gas pipe shell when feeling rich.
-
- Full Steam Ahead
- Posts: 134
- Joined: Mon Oct 31, 2016 5:57 pm
- Boat Name: No Boat Yet
- Location: Yukon, OK
Re: Start of VFT build
What material/source are you considering using for the boiler shell? I have my eye on A106 Sch 40 pipe right now but that stuff is rare to come by in the small quantifies needed for our launches.
- barts
- Full Steam Ahead
- Posts: 1070
- Joined: Wed Nov 18, 2009 6:08 am
- Boat Name: Otter, Rainbow
- Location: Lopez Island, WA and sometimes Menlo Park, CA
- Contact:
Re: Start of VFT build
Looking around,
https://www.trupply.com/ has cut-to-length A106 up to 8" diameter.
https://www.industrialtube.com/tested/ appears to have cut to length service for A106 up to 24" diameter.
I know nothing about either supplier other than what is on their websites.
Another option is talking to a local engineering firm that builds pressure vessels.
- Bart
https://www.trupply.com/ has cut-to-length A106 up to 8" diameter.
https://www.industrialtube.com/tested/ appears to have cut to length service for A106 up to 24" diameter.
I know nothing about either supplier other than what is on their websites.
Another option is talking to a local engineering firm that builds pressure vessels.
- Bart
-------
Bart Smaalders http://smaalders.net/barts Lopez Island, WA
Bart Smaalders http://smaalders.net/barts Lopez Island, WA
- Kelly Anderson
- Full Steam Ahead
- Posts: 173
- Joined: Fri Feb 11, 2011 1:28 am
- Boat Name: Vividus
- Location: Strasburg, PA
- Contact:
Re: Start of VFT build
I bought my boiler shell cut to length from http://www.dspipe.com/page.aspx?page_id=16 DS Pipe in Baltimore.
It was not easy to convince Allnutt. All his shop training had given him a profound prejudice against inexact work, experimental work, hit-or-miss work.
-
- Full Steam Ahead
- Posts: 134
- Joined: Mon Oct 31, 2016 5:57 pm
- Boat Name: No Boat Yet
- Location: Yukon, OK
Re: Start of VFT build
I appreciate it, thank you!