Stainless in the fire

A special section just for steam engines and boilers, as without these you may as well fit a sail.
User avatar
DetroiTug
Full Steam Ahead
Full Steam Ahead
Posts: 1863
Joined: Fri Nov 27, 2009 5:56 pm
Boat Name: Iron Chief
Location: Northwest Detroit

Re: Stainless in the fire

Post by DetroiTug » Mon Nov 21, 2011 9:24 pm

Just got a call from a buddy, a new steamboater as well, about a new Roberts type boiler he was buying. Thanks to this thread was able to deter him from making a bad decision. He was right on the verge of sending the check out for $4k. While talking, he mentioned it was all made professionally from stainless steel. He was glad he called.

-Ron
Mike Rometer
Full Steam Ahead
Full Steam Ahead
Posts: 936
Joined: Sat Aug 13, 2011 6:41 pm
Boat Name: B.N.Y.S.
Location: Middle Earth

Re: Stainless in the fire

Post by Mike Rometer » Tue Nov 22, 2011 9:08 am

I'm led to believe that there are grades of stainless steel that are suitable for building boilers, that don't suffer from stress corrosion cracking, but if your local codes don't allow it, they don't allow it.
Retirement is about doing what floats your boat!

A BODGE : - A Bit Of Damn Good Engineering.
User avatar
fredrosse
Full Steam Ahead
Full Steam Ahead
Posts: 1906
Joined: Fri Nov 20, 2009 5:34 am
Boat Name: Margaret S.
Location: Phila PA USA
Contact:

Re: Stainless in the fire

Post by fredrosse » Tue Nov 22, 2011 2:54 pm

The ASME Boiler & Pressure Vessel Code prohibits the use of "Austenitic Stainless Steels" for wetted parts of the boiler. This includes the 200 Series and 300 Series Stainless Steels. The most common stainless steels encountered are Types 304 and 316, probably 90+ % of the stainless steel used is 304 or 316, and they are prohibited for use in the wetted parts of the boiler. Other common grades: 201,203, 301,302, 303, 304L, 305, 308 (weld wire), 309, 316L, 317, 321, 347.

These stainless steels however are commonly used as tubing in various liquid heat exchangers, fluid system tubing, instrument tubing, etc. They are legal for the "non-wetted" parts of a boiler, such as superheater tubing.
Attachments
ss tube .jpg
304/304L tubing
ss tube .jpg (57.34 KiB) Viewed 3325 times
Post Reply