Page 18 of 18
Re: Steam engine from the North Caucasus
Posted: Sun Jan 21, 2024 10:13 am
by dampfspieler
Hi,
looks interesting.
... The Linux CNC program is already installed on this machine? it is simple and I can learn it quickly.
Which CNC-program do you use?
Best
Dietrich
Re: Steam engine from the North Caucasus
Posted: Thu Jan 25, 2024 6:32 pm
by Freezerrr12
Dear Dietrich! The machine> as I said has the Linux CNC program installed. The operation of the machine is based on sample "G-code" commands. The are in the instructions> which I have in Russian (t's easier fo me). A photo of these instructions, are attached.
Re: Steam engine from the North Caucasus
Posted: Thu Jan 25, 2024 6:43 pm
by Freezerrr12
You can give a command using the keyboard and mouse. Bat very carefully. I have already broken a lot of tools (mills and drills) before I learned how to do basic work. Ingvar.
Re: Steam engine from the North Caucasus
Posted: Thu Jan 25, 2024 7:42 pm
by dampfspieler
Hello Ingvar,
thank you for the answer. I found some information about LinuxCNC and also this interesting video.
https://youtu.be/WS2Zqcu4Duo?si=Fuj0BnQdunSk1x_Z
----
Dietrich