Steam engine from the North Caucasus

Freezerrr12 · Post by **Freezerrr12** » Sun Oct 23, 2022 8:16 pm

Please, find attached pictures of steam pipe between cylinders. The length of it is 0.5 m, diameter - 1 1/2 inch.
Will be waiting for your recommendations.

Freezerrr12 · Post by **Freezerrr12** » Sun Oct 23, 2022 8:26 pm

* approximate capacity of copper pipe with bronze fittings - 1000 cm cubics
Yours sincerely,
Ingvar

PeteThePen1 · Post by **PeteThePen1** » Mon Oct 24, 2022 3:32 pm

Hi Ingvar

Many thanks for the latest posting and I am glad to see that the build is still progressing. I do like what you are doing.

Our Forum seems to have gone rather quiet of late so it is good to know that some members are still busy in their workshops.

Best wishes

Pete

TahoeSteam · Post by **TahoeSteam** » Tue Oct 25, 2022 3:31 am

Ingvar,

Congratulations on your great progress!

I would think that the volume of the HP cylinder would be adequate for the receiver pipe, especially since you have a bit more volume in the LP valve chest as well. A long as there's adequate volume for the LP to get filled and not starved every time the valve opens, you're in good shape.

Freezerrr12 · Post by **Freezerrr12** » Wed Dec 28, 2022 7:54 pm

Happy Christmas Eve to all forum participants! I wish you all success in the implementation of all your projects. i was able to handle the bypass receiver/

Freezerrr12 · Post by **Freezerrr12** » Wed Dec 28, 2022 8:20 pm

Here are the pics.

Freezerrr12 · Post by **Freezerrr12** » Wed Dec 28, 2022 9:00 pm

Here are the pics

[The extension rar has been deactivated and can no longer be displayed.]

dampfspieler · Post by **dampfspieler** » Thu Dec 29, 2022 8:07 am

Back your pardon,

could you post your pics the way you had done first times. I have blocked rar-files.

Best Dietrich

Freezerrr12 · Post by **Freezerrr12** » Sat Feb 25, 2023 9:19 pm

Hi. Trying to post pictures once again.

Freezerrr12 · Post by **Freezerrr12** » Sat Feb 25, 2023 9:27 pm

Sorry pictures were send be mistake. Here are the correct.

The Steamboating Forum

Steam engine from the North Caucasus

Re: Steam engine from the North Caucasus

Re: Steam engine from the North Caucasus

Re: Steam engine from the North Caucasus

Re: Steam engine from the North Caucasus

Re: Steam engine from the North Caucasus

Re: Steam engine from the North Caucasus

Re: Steam engine from the North Caucasus

Re: Steam engine from the North Caucasus

Re: Steam engine from the North Caucasus

Re: Steam engine from the North Caucasus