Page 1 of 1
Ash pan
Posted: Thu Sep 19, 2013 4:09 pm
by johnp
How thick should my ash pan be under the grate in my WT boiler? 1/8"? 3/16"? 1/4"?
Re: Ash pan
Posted: Thu Sep 19, 2013 7:09 pm
by Mike Rometer
I would suggest it depends entirely on the size, shape and configuration, but if designed well, 16G (1.6mm) should be more than adequate.
Re: Ash pan
Posted: Wed Oct 08, 2014 7:57 pm
by Dhutch
Wet or dry ash pan? Stainless steel?
Ours is a dry ashpan, mild steel, around 5mm thick, but it also holds the weight of the point which is a fairly large firetube boiler!
Daniel