Rather Odd "Rotating" engine.

Read this first then introduce yourself here.
Post Reply
Tonyds
Just Starting Out
Just Starting Out
Posts: 2
Joined: Tue Aug 07, 2012 5:46 pm
Boat Name: No Boat Yet

Rather Odd "Rotating" engine.

Post by Tonyds »

Hi. My name is Tony Seideman. I was quite active in the steam launch community in the late '80s and early '90s, but a variety of circumstances led to me doing other things--like restoring an extremely cash-hungry 1903 house.

I picked up some very nice items while I was in the hobby, and, thankfully, most are still in reasonably good condition. One of them is this unusually designed engine, which was restored by a true master, George King III, former chief engineer at Mystic Seaport.

It has a stroke of about 2.25 inches and a bore of around 4 inches. I think it might make a nifty steam launch engines.

I have no idea of where or when it was made, or who made it. George said the signs were it had been used well.

Anybody have any ideas?
Attachments
Rotating_Engine_Bottom_Piston_RS.jpg
Rotating_Engine_Bottom_Piston_RS.jpg (126.22 KiB) Viewed 7769 times
Rotating_Engine2_RS.jpg
Rotating_Engine2_RS.jpg (119.04 KiB) Viewed 7769 times
Rotating_Engine1_RS.jpg
Rotating_Engine1_RS.jpg (112.17 KiB) Viewed 7769 times
farmerden
Stirring the Pot
Stirring the Pot
Posts: 447
Joined: Fri Nov 20, 2009 12:14 am
Boat Name: Steam Queen
Location: Shawnigan Lake B.C. Canada

Re: Rather Odd "Rotating" engine.

Post by farmerden »

Always someone has to be different! But what a dull world it would be if everything was the same! Why we'd still all be using steam! Hmmm so what's wrong with that? ;) Den
Tonyds
Just Starting Out
Just Starting Out
Posts: 2
Joined: Tue Aug 07, 2012 5:46 pm
Boat Name: No Boat Yet

Re: Rather Odd "Rotating" engine.

Post by Tonyds »

Though this engine is relatively small, it is quite a potent beast. I've had it on top of two 2X12s, clamped fairly solidly, and it's made them bounce up and down several inches. I've done the math, and it probably produces three or four horsepower. How big a launch do people think it could manage?
User avatar
fredrosse
Full Steam Ahead
Full Steam Ahead
Posts: 1925
Joined: Fri Nov 20, 2009 5:34 am
Boat Name: Margaret S.
Location: Phila PA USA
Contact:

Re: Rather Odd "Rotating" engine.

Post by fredrosse »

From Den: ...."Why we'd still all be using steam!"

As a matter of fact, there is far more steam power in the world today than there was 100 years ago. Just that the public does not get to see it usually, but if you use electricity, you are almost certainly using steam power. Steam power generates over 80% of all the electricity in the USA, and over 80% of all the electricity for the rest of the world. This steam power output today is thousands of times the power produced in the early 1900's, which is erroneously called the "Steam Age"!
User avatar
artemis
Full Steam Ahead
Full Steam Ahead
Posts: 465
Joined: Wed Nov 18, 2009 4:13 am
Boat Name: Pond Skimmer
Location: Portland, Oregon, USA
Contact:

Re: Rather Odd "Rotating" engine.

Post by artemis »

fredrosse wrote:From Den: ...."Why we'd still all be using steam!"

As a matter of fact, there is far more steam power in the world today than there was 100 years ago. Just that the public does not get to see it usually, but if you use electricity, you are almost certainly using steam power. Steam power generates over 80% of all the electricity in the USA, and over 80% of all the electricity for the rest of the world. This steam power output today is thousands of times the power produced in the early 1900's, which is erroneously called the "Steam Age"!
Which means that your computer is steam powered. Tell that to those people who say steam is old fashioned! :P
Ron Fossum
Steamboating Magazine Editor
http://www.steamboating.org
farmerden
Stirring the Pot
Stirring the Pot
Posts: 447
Joined: Fri Nov 20, 2009 12:14 am
Boat Name: Steam Queen
Location: Shawnigan Lake B.C. Canada

Re: Rather Odd "Rotating" engine.

Post by farmerden »

Would that make us "Trendsetters"?? :D
Post Reply