Ash pan
-
Mike Rometer
- Full Steam Ahead
- Posts: 936
- Joined: Sat Aug 13, 2011 6:41 pm
- Boat Name: B.N.Y.S.
- Location: Middle Earth
Re: Ash pan
I would suggest it depends entirely on the size, shape and configuration, but if designed well, 16G (1.6mm) should be more than adequate.
Retirement is about doing what floats your boat!
A BODGE : - A Bit Of Damn Good Engineering.
A BODGE : - A Bit Of Damn Good Engineering.
-
Dhutch
- Full Steam Ahead
- Posts: 184
- Joined: Wed Jan 26, 2011 12:03 am
- Boat Name: SNB Emily Anne
- Location: Staffordshire (UK)
- Contact:
Re: Ash pan
Wet or dry ash pan? Stainless steel?
Ours is a dry ashpan, mild steel, around 5mm thick, but it also holds the weight of the point which is a fairly large firetube boiler!
Daniel
Ours is a dry ashpan, mild steel, around 5mm thick, but it also holds the weight of the point which is a fairly large firetube boiler!
Daniel